Description
The fiberglass heating belt has a fiberglass insulated protective tube outside, which is bound at the end of the stator winding, with good heat transfer effect, stable performance, and safety and reliability
Technical Parameter
| Model | L×W×Thickness | Lead length | Power | Voltage | Motor specifications; |
| mm | mm | W | V | ||
DJR-220/10 | 220×15×2 | 160 | 10 | 220 | H71 |
DJR-220/20 | 260×15×2 | 340 | 20 | 220 | H80-H90 |
| DJR-220/30 | 350×15×2 | 440 | 30 | 220 | H100-H112 |
| DJR-220/40 | 460×15×2 | 740 | 40 | 220 | H132-H160 |
| DJR-220/50 | 630×15×2 | 850 | 50 | 220 | H180-H200 |
DJR-220/60 | 800×15×2 | 900 | 60 | 220 | H225-H280 |
| DJR-220/80 | 950×15×2 | 1000 | 80 | 220 | H315 |
DJR-220/110 | 2000×15×2 | 1500 | 110 | 220 | H355 |
DJR-230/10 | 240×15×2 | 200 | 10 | 230 | H71 |
DJR-230/20 | 300×15×2 | 380 | 20 | 230 | H80-H90 |
DJR-230/30 | 400×15×2 | 480 | 30 | 230 | H100-H112 |
DJR-230/40 | 550×15×2 | 780 | 40 | 230 | H132-H160 |
DJR-230/50 | 680×15×2 | 900 | 50 | 230 | H180-H200 |
DJR-230/60 | 900×15×2 | 950 | 60 | 230 | H225-H280 |
DJR-230/80 | 1050×15×2 | 1050 | 80 | 230 | H315 |
DJR-230/110 | 1350×15×2 | 1150 | 110 | 230 | H355 |
DJR-110/10 | 220×15×2 | 160 | 10 | 110 | H71 |
DJR-110/20 | 260×15×2 | 340 | 20 | 110 | H80-H90 |
DJR-110/30 | 350×15×2 | 440 | 30 | 110 | H100-H112 |
DJR-110/40 | 460×15×2 | 740 | 40 | 110 | H132-H160 |
DJR-110/50 | 630×15×2 | 850 | 50 | 110 | H180-H200 |
DJR-110/60 | 800×15×2 | 900 | 60 | 110 | H225-H280 |
DJR-110/80 | 950×15×2 | 1000 | 80 | 110 | H315 |
DJR-110/110 | 2000×15×2 | 1500 | 110 | 110 | H355 |
DJR-115/10 | 240×15×2 | 200 | 10 | 115 | H71 |
DJR-115/20 | 300×15×2 | 380 | 20 | 115 | H80-H90 |
DJR-115/30 | 400×15×2 | 480 | 30 | 115 | H100-H11 |
DJR-115/40 | 550×15×2 | 780 | 40 | 115 | H132-H160 |
DJR-115/50 | 680×15×2 | 900 | 50 | 115 | H180-H200 |
DJR-115/60 | 900×15×2 | 950 | 60 | 115 | H225-H280 |
DJR-115/80 | 1050×15×2 | 1050 | 80 | 115 | H315 |
DJR-115/110 | 1350×15×2 | 1150 | 110 | 115 | H355 |
Model Example：DJR-220/80
DJR | Heated Belt for motor |
| 220 | Voltage（V） |
| 80 | Power（W） |
Ordering Example：DJR-220/80/950-1000
| 950×15×2 | belt length×width×Thickness |
1000 | Lead length |
Installation method：
Firstly, confirm whether the rated working voltage of the heating belt matches the power supply voltage used; When using a moisture-proof heating belt, to install it at the shaft extension end of the stator winding; When using two moisture-proof heating belts, one is installed at the shaft extension end and the other is installed at the non shaft extension end; The heating belt is bound at the end of the stator winding and cannot be installed overlapping.
1.Avoid folding or scratches on the heating belt.
2. After shaping the motor winding, then install the heating belt.
3.The heating belt must be tightly attached to the surface of the winding.
4. Do not subject the heating belt to strong tensile force.
5. Hammering and heating are strictly prohibited. 6. It is strictly prohibited to operate the heating belt and motor simultaneously.
QQ聯系
一鍵撥號
關注微信